MokerLink 8 Port 2.5G PoE Switch, 8 x 2.5 Gigabit RJ-45 Base-T Ports, IEEE802.3af/at, 120W Power Supply, Unmanaged Multi-Gigabit Desktop Ethernet Switch

8 port 2.5G PoE unmanaged switch with line speed forwarding capability per port. It has good network adaptability for applications such as security monitoring, diskless startup and wireless networking.

• 8*10M/100M/1G/2.5Gbps PoE ports for high-speed transmission.
• SupportIEEE 802.3af/at (Max. 30W for per port)
• Up to 80G backplane bandwidth, 12M cache, 28.8M packet forwarding rate, and support 12K jumbo frame transmission.
• Energy saving technology is adopted to automatically adjust the signal strength by detecting the length of network cable and workload, so as to effectively reduce energy consumption.
• Plug and play, no management required.
• Dynamic LED indicator provides simple working status prompt and troubleshooting.

Full 2.5G Ports Configuration

8 port 2.5G PoE switch supports speeds ranging from 10Mbps to 2.5Gbps. your network devices can run at their designated speeds without any limitations. It is also backward compatible. If you already have the traditional Cat5E and Cat6 cables, you won't need to buy new ones.

IEEE 802.3af/at(PoE+) Support

8 port 2.5g PoE switch support IEEE 802.3at (PoE+) standard which supports up to 30W of power on the ports, allowing devices that require more than 15.4W to power on when connected to the PoE+ ports.

Support Jumbo Frame

2.5G PoE switch support jumbo frame. Jumbo Frames can reduce your bandwidth usage. It load more data into fewer ethernet frames. By using fewer frames, you reduce the overall number of transactions on the network. It also reduces stress on you networking equipment.

Fanless and Noiseless

This is a silent and perfectly noiseless 2.5g ethernet switch. All the internal hardware is passively cooled which is very beneficial for home and office applications that require a silent or noiseless environment.

Plug and Play

Unmanaged 2.5g PoE switch, no configuration required. Simply plug a device into the network. It automation begins.

LED Indicator

System status and speed can be determined through the activity of the LEDs on the switch. There are three possible LED states on each port. Orange(Left): the transmission rate is 2.5Gbp. Green(Left): the transmission rate is 1Gbps. Green(Right): the transmission rate is 10 / 100M.